ACE shock absorber, M 14x1, self-adjusting, stroke 12,7 mm

Item number:

MC 150 EUME

€89.28
pcs
Item description
Materials:
shock absorber body and accessory: Steel bronzing, piston rod: hardened, stainless steel, roller type diaphragm: ethylene-propylene

Temperature range:
0 to +66 °C

Stroke speed:
0,06 to 6 m/s

Fixed limit stop:
integrated

Information:
Exceeding W4: (max. energy absorbed per hour expressed in Nm/h) is possible when switched off temporarily or the shock absorber is cooled with the cylinder exhaust air (take note of the approved heating)
Properties
Thread B M 14x1
Stroke [mm] 12,7
max. En­ergy con­sump­tion per stroke (W3) [Nm] 20
max. En­ergy con­sump­tion per hour (W4) [Nm] 34000
ef­fec­tive mass (me) [KGM] 0,9 - 10
Spring force [N] 3 - 8
A [mm] 7,2
C [mm] 69,1
E [mm] 8
G [mm] 4,8
I [mm] 17,5
SW1 [mm] 6
SW2 [mm] 17
Max. axial de­vi­a­tion* [°] 4
Im­pact head PP 150
clamp­ing flange MB 14
Stop sleeve AH 14
Side load adapter** BV 14
Lock­ing nut KM 14
Further information on MC150EUME
Weight 55 g / pcs
Customs duty number 84879059
RoHS compliant Yes
Manufacturer ACE
Documents
*at higher axial deviations use side load adapters (Type BV)
***The side load adapter can only be fitted on shock absorbers without an impact head, or if required, it must be dismantled.

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available