Elbow push in fitting R 1/4"-6mm, IQS-ES LE/IQS-PVDF

IQSL 146 PVDF

Exemplary representation: Push-in L-fitting with conical thread, PVDF
19,10€ incl. VAT
pcs
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.beschreibung_headline') }}
Materials:
Type stainless steel: Body and release ring: 1.4401, seals FKM, green (FDA 21 CFR 177.2600), Holding claws: Stainless steel 1.4310, Lubricant: Silicone grease (NSF / ANSI 51 & 61)
Type PVDF: body and release ring: PVDF, threaded part: Stainless steel 1.4401, gaskets: FKM, green (FDA 21 CFR 177.2600), retaining claws: Stainless steel 1.4310, lubricant: Silicone grease (NSF / ANSI 51 & 61)


Temperature range:
Type stainless steel: -20 °C to +200 °C (Ø 16: -15°C to +190°C)
Type PVDF: -20 °C to +120 °C


Operating pressure:
Type stainless steel: -0.95 to 20 bar
Type PVDF: Ø 4 - 6 mm: -0.95 to 20 bar (+20 °C), -0.95 to 10 bar (+100 °C), -0.95 to 3 bar (+120 °C), Ø 8 mm: -0.95 to 20 bar (+20 °C), -0.95 to 8 bar (+100 °C), -0.95 to 3 bar (+120 °C), Ø 10 - 12 mm: -0.95 to 12 bar (+20 °C), -0.95 to 6 bar (+100 °C), -0.95 to 3 bar (+120 °C)


Media:
oiled and unoiled compressed air, non-hazardous gasses and liquids

Advantages:
•Available with conical thread or with cylindrical thread with chambered O-ring,
•Gaskets and lubricants with approval according to FDA or NSF/ANSI,
type PVDF: lighter and cheaper than push-in fittings made of stainless steel with simultaneous high chemical resistance,
type PVDF: transparent body allows visibility of the medium inside the connector
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Material PVDF
R R 1/4"
D [mm] 6
IQSL146PVDF
{{ $t('shop.all.gewicht') }} 34 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }} 74122000
{{ $t('shop.display.artikel.rohskonform') }} {{ $t('shop.all.ja') }}
{{ $t('shop.all.hersteller') }} Sang-A
{{ $t('shop.all.dokumente') }}
    Catalogue page Atlas 9 (Page 94a_n) atlas9_neutral_seiten/94a_n.pdf
    Documentation: Decision-making tool for the selection of IQS push in fittings and the matching hoses dokuneutral/entscheidungshilfen_steckanschluesse_n.pdf
    3D CAD file (volume model) protected/cad/3d/70709/iqsl146pvdf589903.stp
  • {{ $t('shop.display.datenblatt.titel') }} (Print view)

 
{{ $t('shop.all.unverbindliche_richtwerte') }}

Accessories

{{ $t('shop.all.spaetbestellservice') }}
{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.