EPDM replacement seal f. Kamlock coupling DN32 (1-1/4")

Item number:

KLOR 114 EP

€2.17
pcs
Item description
Materials:
NBR: (-10°C to +80°C) elastic standard material for neutral media such as air, oil and water. Good resistance to mechanical loads, EPDM: (-20°C to +130°C) elastic, resistance to alkaline solutions and acids of average concentration, water, hot water and steam. Not resistance to oils and greases, FKM: (-20°C to +180°C) elastic, elastomer with high temperature and weather resistance. Suitable for many acids, bases, fuels and oils (also synthetic). Not resistant to hot water and steam, CSM (Hypalon): (-40°C to +140°C) elastic and with good chemical resistance,
PTFE*: (-180°C to +200°C) very stiff and very good chemical resistance (install carefully). Resistant against almost all chemicals, even at high temperatures, NBR / PTFE: (-10°C to +80°C) elastic and with very good chemical resistance, FKM / PTFE: (-20°C to +180°C) elastic and with very good chemical resistance,
Properties
Ver­sion solid ma­te­r­ial
Ma­te­r­ial EPDM
DN [mm] 32 (1-1/4")
Outer di­am­e­ter (ap­prox.) [mm] 50
Thick­ness [mm] 6,4
Tem­per­a­ture range [°C] -20 to +130
Further information on KLOR114EP
Weight 6,9 g / pcs
Customs duty number 40169300
Documents
*Not recommended as very stiff, small nominal widths are difficult to assemble!

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available