HSP-16-AP-WL (533612) handling module

Item number:

OT-FESTO009074

€3,659.83
pcs
Properties
size 16
Y-​stroke [mm] 90 to 110
Z-​stroke [mm] 35 to 50
Z-​stroke work­ing stroke [mm] 20
Damp­en­ing CC: Shock ab­sorber, double-​sided,
Soft char­ac­ter­is­tic curve
in­stal­la­tion po­si­tion Guide car­riage,
ver­ti­cal
Prin­ci­ple of op­er­a­tion dou­ble act­ing
Con­struc­tion set up Cross-​guide,
Swivel mod­ule,
Cal­i­bra­tion po­si­tion, se­lec­tively left,
Force con­trolled move­ment cycle
Po­si­tion de­tec­tion For prox­im­ity switch
Anti-​twist lock / guide Cross-​guide
Op­er­at­ing pres­sure [bar] 4 to 8
Min. cycle time [s] 0,8
Re­peata­bil­ity ±0.01 mm
Op­er­at­ing medium Com­pressed air to ISO 8573-​1:2010 [7:-:-]
In­for­ma­tion about op­er­at­ing and con­trol medium Oiled op­er­a­tion pos­si­ble (re­quired in fur­ther op­er­a­tions)
am­bi­ent tem­per­a­ture [°C] 0 to 60
Max. torque Mx dy­namic [Nm] 2,4
Max. torque Mx sta­tic [Nm] 10
Max. torque My dy­namic [Nm] 2,4
Max. torque My sta­tic [Nm] 10
Max. torque Mz dy­namic [Nm] 2,4
Max. torque Mz sta­tic [Nm] 10
Max­i­mum usage load [KGM] 1,0
The­o­ret­i­cal force at 6 bar [N] 50
Prod­uct weight [g] 3.300
Fas­ten­ing front unit With through­way bores
Fas­ten­ing type With through­way bores,
With Cap nuts
Pneu­matic con­nec­tion M5
Base plate ma­te­r­ial Alu­minium wrought alloy
Cross-​guide ma­te­r­ial Quenched and tem­pered steel
Side parts ma­te­r­ial Alu­minium wrought alloy
Max. Z-​stroke cal­i­bra­tion po­si­tion [mm] 25
Pneu­matic con­nec­tion cal­i­bra­tion po­si­tion M5
Further information on OT-FESTO009074
Weight 3.300 g / pcs
Customs duty number 84798997
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
deliverable again in ⌀ 11 days