€1,124.69
pcs
Item description
Operating range:
Pneumatic pinch valves are the fitting solution for the shut-off, regulation and dosing of abrasive, corrosive and fibrous products. They are ideally suited for use with these products due to their completely free product flow, whereby a practical blocking and dead space-free fitting results. The pneumatic pinch valves ensure an optimal shut-off, also when used with solids, such as granules, powders, pellets, chipping, sand, cement, gravel, textile fibres, carbon, fine glass fragments and liquids that contain solids.

Advantages:
•Completely free flow,
•No clogging by media,
•Minimum frictional resistance,
•Quick opening and closing,
•Low energy consumption


Materials:
Body: aluminium, flange: cast aluminium with bushing made of 1.4404 (wetted parts made of 1.4404), cuff: natural rubber in food quality

Control pressure:
max. 1,5 to 2 bar higher than the medium's pressure

Temperature range:
-10°C to max. +80°C

Optional:
Cuff made of natural rubber, abrasion resistant (-10°C to max. +80°C) -AB, cuff made of EPDM (-10°C to max. +90°C)* -EP, cuff made of nitrile, grease and oil resistant, no sockets of 1.4404 (-10 °C up to max. +80°C) -B
Properties
Ma­te­r­ial Alu­minium
Ver­sion Pinch valve, sleeve made of nat­ural rub­ber (food grade)
Flange con­nec­tion DN100-​PN16 (DIN/EN)
DN [mm] 100
L [mm] 280
Op­er­at­ing pres­sure [bar] 0 - 6
DA [mm] 220
A G 1/4"
Spare cuff made of nat­ural rub­ber (food grade) QVFL 100 LE REP
Re­place­ment sleeve made of nat­ural rub­ber (abrasion-​resistant) QVFL 100 AB REP
Re­place­ment sleeve made of EPDM* QVFL 100 EP REP
Spare col­lar of ni­trile QVFL 100 B REP
Tem­per­a­ture range [°C] -10 to +80
Further information on QVFL100
Weight 9 kg / pcs
Customs duty number 84818087
Documents
*DN 40 - DN 50: -10°C to max. +120°C, **steel housing and flange

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available