€11.49
pcs
Also notice our alternatives
Our alternatives (similar item) This is based on our general assessment. Please check that the item is suitable for your special operating case. If in doubt, please ask us for advice.
Immediately available
You are not logged in. The availability display refers therefore to 1 pcs. Log in to have the availability of the requested quantity displayed.
Properties
size Standard
Nominal width [mm] 11,0
Fire inspection, material UL94 V-0 (Housing),
UL94 V-0 (sleeve)
Seal type on stud gasket
Construction set up Push-pull principle
Operating pressure complete temperature range [bar] -0.95 to 10
Maritime classification see Certificate
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-],
Water according to manufacturer declaration at www.festo.com
Information about operating and control medium Oiled operation possible
Corrosion resistant class KBK 2 - moderate corrosion stress
ambient temperature [°C] 0 to 60
Product weight [g] 40,0
Pneumatic connection 1 G1/2
Pneumatic connection 2 For hose exterior diameter 12 mm
Sleeve colour black
Stud material Nickel-plated brass
Material information RoHs compliant
Housing material PBT reinforced
Nominal tightening torque [Nm] 26,0
Tolerance to nominal tightening torque ± 20 %
Further information on OT-FESTO014949
Weight 40,0 g / pcs
Customs duty number 74122000
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available